Search results

This study aims to investigate the influence mechanism of thermal-mechanical deformations on the CO₂ mixture gases dry gas seal (DGS) flow field and compare the deformation characteristics and sealing performance between two-way and one-way thermal-fluid-solid coupling models.

The authors established a two-way thermal-fluid-solid coupling model by using gas film thickness as the transfer parameter between the fluid and solid domain, and the model was solved using the finite difference method and finite element method. The thermal-mechanical deformations of the sealing rings, the influence of face deformation on the flow field and sealing performance were obtained.

Thermal-mechanical deformations cause a convergent gap between the two sealing end faces, resulting in an increase in the gas film thickness, but a decrease in the gas film temperature and sealing ring temperature. The axial relative deformations of rotating and stationary ring end faces caused by mechanical and thermal loads in the two-way coupling model are less than those in the one-way coupling (OWC) model, and the gas film thickness and leakage rate are larger than those in the OWC model, whereas the gas film stiffness is the opposite.

This paper provides a theoretical support and reference for the operational stability and structural optimization design of CO₂ mixture gases DGS under high-pressure and high-speed operation conditions.

This study aims to acquire the influence mechanism of gas film adaptive adjustment (GFAA) acted on the dynamic characteristics of spiral groove dry gas seal (S-DGS) and then propose a sealing stability enhancement measure.

The gas film dynamic stiffness and damping of S-DGS are obtained by numerically solving the transient Reynolds equation based on perturbation method and finite difference method. The dynamic coefficients in GFAA model and constant gas film thickness (CGFT) model are compared and analyzed.

There is the risk to misestimate the instability of DGS with rotational speed or medium pressure grows under the condition of CGFT assumption. Based on GFAA model, increasing balance ratio B properly is an effective measure to improve the stability of DGS. The balance ratio can stimulate the sensitivity of gas film dynamic coefficients to the variation of rotational speed. Increasing medium pressure in small balance ratio range will be conducive to reducing the risk of angular instability.

The influence mechanism of GFAA on S-DGS dynamic characteristics is analyzed. The interactions between rotational speed and balance ratio, medium pressure and balance ratio acted on gas film dynamic characteristics are explored based on the GFAA model.

The traditional maintenance scheduling strategies of multi-component systems may result in maintenance shortage or overage, while system degradation information is often ignored. The purpose of this paper is to propose a multi-phase model that better integrates degradation information, dependencies and maintenance at the tactical level.

This paper proposes first a maintenance optimization model for multi-component systems with economic dependence and structural dependence. The cost of combining maintenance activities is lower than that of performing maintenance on components separately, and the downtime cost can be reduced by considering structural dependence. Degradation information and multiple maintenance actions within scheduling horizon are considered. Moreover, the maintenance resources can be integrated into the optimization model. Then, the optimization model adopting one maintenance activity is extended to multi-phase optimization model of the whole system lifetime by taking into account the cost and the expected number of downtime.

The superiority of the proposed method compared with periodic maintenance is demonstrated. Thus, the values of both integrated degradation information and considering dependencies are testified. The advantage of the proposed method is highlighted in the cases of high system utilization, long maintenance durations and low maintenance costs.

Few studies have been carried out to integrate decisions on degradation, dependencies and maintenance. Their considerations are either incomplete or not realistic enough. A more comprehensive and realistic multi-phase model is proposed in this paper, along with an iterative solution algorithm for it.